Katalog Alpina B3 3.3 touring Allrad | cars-of-europe.com Katalog Alpina B3 3.3 touring Allrad | cars-of-europe Katalog Alpina B3 3.3 touring Allrad | cars-of-europe
  Home   Catalog  Alpina  B3
 

  Alpina B3 3.3 touring Allrad

 

Technical Specifications



 

All important specifications are listet below as Alpina has published them for the B3 officaly in the german market. However: Changes by the manufacturer are possible at any time - so all specifications are without any guarantee.

  
  
 Alpina B3 3.3 touring Allrad € 56,200 
BrandAlpina
KBA manufacturer key7656
Manufacturer´s adressBurkard Bovensiepen GmbH & Co., Alpenstraße 37, 86807 Buchloe, Tel.: 08241-5005-0
End of production-
BodystyleStation Wagon
Seating capacity4-5
Type of engineIn-line
Engine installationFront mounted engine, longitudinal
Max. power output206 kW
280 PS
~ 276 hp
@ 6200 rpm
Compression ratio10.0:1
ValvetrainDual Over-Head Cam (DOHC)
ChargerNone
Drivetrain serialPermanent all-wheel drive
Automatic transmission6
0 to 100 km/h Note: Performance is always a relative value. Even the manufacturers measure in different ways. The value for example depends on weight, atmospheric pressure and more. Normaly manufacturers correct their measurement results to 1000 mbar atmospheric pressure (sea level), 20 ºC temperature and 43% humidity - these are the harmonized standards in europe and are on the most motor power testing stations.
(~ 0 to 62 mph)
7.2 sec.
Weight-to-power ratio 7.4 kg/kW
5.4 kg/PS
~ 5.5 kg/hp
FrontTransverse control arm
Spring strut
Transverse stabilizer
Power steeringserial
Rear brakesDisc brakes, inner-vented
Anti-Slip Regulation (ASR) Note: ASR electronicaly prevents weelspin - for example on snow and wet streets.serial
Side airbagsserial
Recommended fuelPremium unleaded, 98/95 RON
CO2 emissions280.8 CO2 g/km
Last update: 08/18/15 
 Overwiew "Alpina" OverviewTop Top TopDimensions & Weights Dimensions & Weights of the "Alpina"